Home Theater Forum and Systems banner
1 - 2 of 2 Posts

· Registered
Joined
·
3,249 Posts
Another vote for 80Hz ...:T

You can also try 60Hz and 70Hz if you have the options, set al speakers to small; but in some cases you'll benefit from using the front as large (depending on their frequency response, mine goes to 35Hz).

Do you use REW??? ...that's the best way to see how the crossover setting affected the response, to me it was hard to notice any difference between 80Hz and 60Hz crossover settings just by ear...:hide:
 

· Registered
Joined
·
3,249 Posts
I have the Sony Blu Ray 550. What about the speaker settings on the 550?
I recall reading that you have to set the speakers to large, I'm sure you need to tell the 550 that you have a sub or it will redirect the LFE signal to front speakers, distance and level ...I don't know.

I think this way the AVR will handle the sound according to your setup :yes:....What did the manual of the 550 says???
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top