Home Theater Forum and Systems banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
9,319 Posts

Unless you can generate a calibration file for the Zoom, and obtain a calibration file for its mics, any measurements you take with REW won't be of much value. You won't be able to tell where your speakers' response ends and the unit's begins.

For example, if the response of Zoom's mics roll off sharply below 35 Hz, and your sub is strong down to 20 Hz, measurements will show (no surprise) that your sub rolls off sharply below 35 Hz. Make sense?

Regards,
Wayne


 
1 - 1 of 1 Posts
Top