Home Theater Forum and Systems banner

201 - 220 of 241 Posts

·
Premium Member
Joined
·
1,255 Posts
Does anyone rave the most recent file for the Stereo Integrity HS24, 4ohm version? The one I found in this thread is listed as the IB driver and the provider stated that it could be inaccurate.

Thanks,
Doug
 

·
Super Moderator
Joined
·
5,869 Posts
If the latest T/S is from the SI website than I have that file. Are you wanting a different one?

Its the only one I have ever had. Ricci's might be slightly different.
 

·
Premium Member
Joined
·
1,255 Posts
If the latest T/S is from the SI website than I have that file. Are you wanting a different one? Its the only one I have ever had. Ricci's might be slightly different.
That should be the one, same as post #155?. Ricci's are different than what is listed on the SI website. I just wanted to make sure before I get started on some absolutely enormous boxes!
 

·
Registered
Joined
·
267 Posts
What about Le? 3.79 mH Vs Ricci's 5.3 mH makes a bit of a difference in the driver's HF response; also, if the coils are wired in parallel, Le will theoretically be quartered ~1.325 mH], a plus if getting the most mid-bass SQ out to an 80 Hz XO point and especially if higher is desired.

GM
 

·
Super Moderator
Joined
·
5,869 Posts
I just use the 3.79 that is posted on the website. If needing exact specs for myself and really serious I would measure one in my hands and go from there. Le difference between the two isnt going to change my mind if I am buying it or not.
 

·
Registered
Joined
·
15 Posts
Has anyone posted the Dayton Audio TS400D-4 15" Titanic Mk 4 Subwoofer 4 Ohm? I've been trough the thread a few times but keep missing it if it is here. Thanks. I tried entering the data I could find myself but I keep getting a "parameter error".
 

·
Registered
Joined
·
267 Posts
I just use the 3.79 that is posted on the website. If needing exact specs for myself and really serious I would measure one in my hands and go from there. Le difference between the two isnt going to change my mind if I am buying it or not.
OK, though this isn't about what you or I may value as important as Le can be a 'deal breaker' for some folks [me included], but publishing the most accurate set of specs available.

GM
 

·
Registered
Joined
·
267 Posts
Has anyone posted the Dayton Audio TS400D-4 15" Titanic Mk 4 Subwoofer 4 Ohm? I've been trough the thread a few times but keep missing it if it is here. Thanks. I tried entering the data I could find myself but I keep getting a "parameter error".
FYI, if you look at the top of the first post you will see a Search this Thread clickable drop down field to make quick work of searching a long thread. All audio/whatever forums I browse-post on has this feature, though not always in the same location.

"parameter error" = user input error :( in that one usually inputs too much information that causes a conflict between two sets of math routines. Both the HELP file and the 'Sticky' thread explains the two ways to input either just the T/S specs or the preferred [usually] more accurate individual specs that they are derived from.

GM
 

·
Registered
Joined
·
15 Posts
Thanks. The search function verified what I thought, there isn't a post on the TS400D-4. I'll read through the sticky thread and figure out what I'm doing wrong till I get it right since it isn't available.
 

·
Registered
Joined
·
267 Posts
You're welcome! I was hoping you would take this attitude rather than me just post it, but if it still proves problematic, please post a screen shot of what you inputted that still gets you the dreaded "parameter error".

So many folks either don't bother to read the various HELP files or claim to find them too confusing, so maybe the 'Sticky' thread needs to be revised [I haven't read it].

GM
 

·
Registered
Joined
·
15 Posts
The thread worked like a charm. I can see how some steps may be a bit hard to follow but reading each step fully before doing it helps. I did get the driver to work for me. Thanks again for pointing me in the right direction!
It's better for me to learn how to do it myself instead of relying on others to post the files for me.
 

·
Registered
Joined
·
267 Posts
You're welcome! Good to know it's not as bad as some have made it out to be. So, you going to post it for others?

GM
 

·
Registered
Joined
·
267 Posts
JBL GTO1014TD inputting Mms, Cms, Qms, BL, in lieu of Fs, Vas, Qes since it calculates a ~51% larger cab:

GM
 

Attachments

201 - 220 of 241 Posts
Top