I have a Yamaha Advantage RX-A 3050 that uses YPAO, not YPAO R.S.C. I will be setting up my Home Theater as an 11.4 configuration with all Klipsch speakers and subs.
In researching your recommendations I can see how the miniDSP 2X4HD would be a good tool to set up the four subwoofers. From what I can see that setup from the receiver seems very straightforward.
I noticed in reading your articles that 2X4HD/DDRC-24 and/or nanoDVR HD would be an excellent addition to setting up my speaker system further after using YPAO. I have done a lot of reading and for the life of me I am having difficulty in how to set up the hardware if I even need it.
The UMIK-1 seems simple enough but setting up the miniDSP 2X4HD with DDRC-24 or the nanoAVR HD is somewhat confusing. Remember, Baptist Pastor - Bible is not a problem and I am getting the hang of some of the audio but I really have a lot of learning to do.
I would like to know what the best setup might be with my receiver.Would it be good to use the UMIK-1 with REW to tweek the system after using YPAO?
Since the 2X4HD has a Toslink input I am wondering if that is the best way to connect everything from the Yamaha. The Yamaha does not have RCA jacks for every speaker output to connect to the 2X4HD unless I am missing something. I do realize you cannot connect every speakers' output to the 2X4HD at the same time via RCA.
Obviously, I realize I can only work on two speakers at a time while using the 2X4HD.
The bottom line is I am essentially trying to tweak my 11 speakers after running YPAO. Then use the 2X4HD for the subs.
I would need to know if DDRC-24 or nanoAVR HD would even be beneficial to me.
God bless you all,
Pastor Greg Heenan
Unity Baptist Church
Baton Rouge, LA.
In researching your recommendations I can see how the miniDSP 2X4HD would be a good tool to set up the four subwoofers. From what I can see that setup from the receiver seems very straightforward.
I noticed in reading your articles that 2X4HD/DDRC-24 and/or nanoDVR HD would be an excellent addition to setting up my speaker system further after using YPAO. I have done a lot of reading and for the life of me I am having difficulty in how to set up the hardware if I even need it.
The UMIK-1 seems simple enough but setting up the miniDSP 2X4HD with DDRC-24 or the nanoAVR HD is somewhat confusing. Remember, Baptist Pastor - Bible is not a problem and I am getting the hang of some of the audio but I really have a lot of learning to do.
I would like to know what the best setup might be with my receiver.Would it be good to use the UMIK-1 with REW to tweek the system after using YPAO?
Since the 2X4HD has a Toslink input I am wondering if that is the best way to connect everything from the Yamaha. The Yamaha does not have RCA jacks for every speaker output to connect to the 2X4HD unless I am missing something. I do realize you cannot connect every speakers' output to the 2X4HD at the same time via RCA.
Obviously, I realize I can only work on two speakers at a time while using the 2X4HD.
The bottom line is I am essentially trying to tweak my 11 speakers after running YPAO. Then use the 2X4HD for the subs.
I would need to know if DDRC-24 or nanoAVR HD would even be beneficial to me.
God bless you all,
Pastor Greg Heenan
Unity Baptist Church
Baton Rouge, LA.